The JMP DRIVE is an overdrive/distortion with a British character. The gain bandwidth ranges from semi-clean to modern heavy rock sounds, thus it is very versatile. The maximum available gain can be set with an internal trimmer resistor.
Due to the special designed electronic circuit, the JMP DRIVE reacts very dynamically and the gain can be controlled easily by the guitars volume knob or even with your picking strength. The JMP DRIVE can also be used with other overdrives or in front of an overdriven amplifier.
The tone control is an active 3-band equalizer with additional MIDS switch. The switch sets the center frequency of the MIDDLE knob, from low-mid to high-mid.
GAIN adjusts the amount of gain, from semi-clean to british high gain BASS, MIDDLE, TREBLE active 3-band equalizer to cut/boost the frequencies, MIDDLE-knob with neutral middle setting, equalizer in combination with the MIDS-switch is a very powerful tool LEVEL adjusts the volume level MIDS sets the mid-frequency: right = 1kHz, middle = 500Hz, left = 2kHz
Supply Voltage 9-18V DC Current Draw 28mA @ 9V Controls Gain, Bass, Middle, Treble, Level Switches On/Off (True Bypass), Mids Jacks Input, Output, 9-18V DC Indicator LED 5mm red, ultrabright Dimensions ca. 110 x 60 x 50 mm Weight ca. 230 g